KEMO Second Battery Charger 6-24V/DC M102N

For lead based batteries 6 to 24 V. With this battery separating filter 2 batteries are charged separately at one source of charging current (vehicle generator, solar systems, windmills, chargers etc). For charging currents up to 10A (20A with cooling ). The charging current distributes from the M102N in such a manner that an empty battery will be charged more than an battery that is almost charged.

Perfect for motor caravans if one battery operates the television, radio etc. and the second battery must remain charged in order to start the motor. Also, ideal for weekend cottages if one battery which is used by the alarm system must not be emptied.

Technical Data

• Operating voltage: 6 - 24 V/DC
• Batteries to be connected: 2 each of the same voltage 6 - 24 V/DC
• Max. charging current: 10 A (with cooling max. 20 A (total current)
• Dimensions: ca. 87 x 60 x 33 mm (with mounting bottom)

Important installation instructions : 

Depending on the load the module heats up. The heat is dissipated from the aluminum plate at the bottom of the module. Under certain circumstances it must be mounted on a cooling surface according to installation instructions. It is important that the module is fixed with 4 M3 screws (or 2.9mm metal screws) on the cooling surface. This may be the back wall of a metal casing. The aluminum plate on the bottom of the module must not bend, do not use larger screws and do not drill larger holes. The screw heads must rest on the plate of the module, rather than on the plastic edge of the module! During assembly, the module should not be curled up (if the ground is not flat). The reason: on the inside of the aluminum base of the module the thin insulating layer are directly soldered on the electronic SMD components. When the aluminum floor of the module curls up, the joints and the module start loosen and the module is defective. Please ensure that the maximum specified temperature (as specified in the module's description) is not exceeded. Otherwise apply a larger cooling plate.